Médias

DHL go green

Tous nos envois à l'exportation avec DHL Express sont neutres pour le climat. En utilisant DHL GoGreen, nous investissons dans des projets de protection du climat dans différentes régions du monde, en soutenant un mélange de projets dans les catégories "efficacité énergétique", "énergie renouvelable" et "reforestation/afforestation". Nous insistons sur des normes élevées et les projets de protection du climat sélectionnés sont basés sur leur valeur à la fois pour l'environnement et pour les communautés locales. La protection de l'environnement est une priorité pour DHL. avec un objectif environnemental ambitieux de zéro émission d'ici 2050.

En savoir plus sur DHL GoGreen

Tapflo lance la CTX - la toute nouvelle série de pompes centrifuges haute performance

Tapflo présente la CTX, une toute nouvelle série de pompes centrifuges de haute performance qui se caractérisent par leur conception robuste, leur fiabilité opérationnelle et leur flexibilité d'application.

La conception de la pompe centrifuge haute performance CTX de Tapflo garantit que la série peut être adaptée à une multitude d'applications et de conditions de processus, offrant une plus grande flexibilité avec des options de mise à niveau rapide et facile permettant l'interchangeabilité des pièces entre les types et les tailles de pompes, améliorant la maintenabilité.

Une caractéristique centrale de la conception de la Tapflo CTX est la roue ouverte à facettes multiples qui peut être optimisée pour s'adapter à chaque milieu et application tout en maintenant la capacité de transférer des produits visqueux et particulièrement ceux avec un contenu élevé de solides. Une autre caractéristique clé est l'option d'une double garniture mécanique. Cette étanchéité est appliquée lorsque conditions hostiles du fluide, c'est-à-dire viscosité élevée, teneur en solides, liquide gazeux ou dangereux. Dans le cas d'un montage dos à dos, la garniture est installée dans une chambre séparée.

"Nous avons commencé à travailler sur la conception de la pompe CTX parce que les utilisateurs finaux manquaient d'une pompe centrifuge de gamme supérieure qui présente un rendement élevé et une construction robuste avec un excellent rapport qualité-prix. Pour répondre à cette demande, nous avons développé la pompe CTX haute performance. Cette pompe se caractérise par un faible niveau de bruit et de vibrations, une maintenance aisée et une construction robuste. Ces deux derniers facteurs, combinés à des performances de pointe, ont été nos principaux principes de conception lors du développement de la pompe. La CTX est "conçue au-delà" pour être encore plus robuste que ce qui est attendu pour son fonctionnement normal. De notre point de vue, l'endurance et les performances des produits haut de gamme sont essentielles. Nous voulons gagner sur la fiabilité, pas sur les pièces détachées", explique Mikołaj Laguna-Horodniczy, responsable du marketing mondial du groupe Tapflo.

Les pompes CTX de Tapflo sont disponibles en version hygiénique (CTX H) et industrielle (CTX I). Les pompes sont optimisées pour une performance hautement efficace dans une large gamme de conditions de fonctionnement pour plusieurs industries. La Tapflo CTX est une excellente solution pour les applications laitières typiques comme le transfert de lait et de yaourt. Le CTX est également une option de choix pour les applications chimiques et pharmaceutiques exigeantes comme le transport de produits chimiques et de produits prêts à l'emploi à partir de réservoirs de stockage, de conteneurs et de bains. Une autre application où le CTX s'adapte bien est le transfert de divers ingrédients et produits comme l'huile alimentaire, les arômes et les jus, ainsi que de nombreuses opérations auxiliaires comme le transfert de liquides de nettoyage et d'eau.

"La Tapflo CTX H est une pompe centrifuge hautement hygiénique et aseptisée car la garniture d'arbre n'est pas en contact direct avec le fluide. Elle est facile à nettoyer, et le fluide transféré n'est pas contaminé. La CTX a de meilleures performances et une meilleure efficacité que d'autres pompes similaires sur le marché, et ce à un prix bas et extrêmement compétitif. Comme toutes les autres pompes Tapflo, nous pouvons livrer la CTX directement de notre usine et de nos magasins dans le monde entier, les délais de livraison courts font partie de notre mission",dit Håkan Ekstrand, CCO (Chief Commercial Officer) du groupe Tapflo.

Tapflo présente une nouvelle série de pompes submersibles

Tapflo est un partenaire de confiance sur le marché des pompes industrielles depuis plus de 40 ans, offrant des pompes à diaphragme, des pompes centrifuges et d'autres équipements de processus industriels. Le fournisseur et fabricant mondial de pompes élargit maintenant son offre avec le lancement d'une nouvelle série de pompes submersibles conçues pour une gamme étendue d'applications.

La série de pompes submersibles offre des pompes pour le drainage de surfaces planes, les eaux usées, l'assèchement ainsi que les boues et les boues contenant des particules. Elles sont toutes optimisées pour le pompage sans problème des eaux de source, des eaux de pluie et des eaux souterraines, des eaux contenant des matières solides molles et des matières fibreuses en suspension, ainsi que des eaux chargées de sable et d'abrasifs.

"Nous recevons de plus en plus de questions concernant les pompes submersibles et cette série est un pas en avant pour devenir un partenaire encore plus complet en matière de solutions de pompage. de solutions de pompage encore plus complètes. Comme pour nos autres solutions de débit, nous pouvons livrer rapidement une gamme de modèles différents à partir de nos entrepôts et magasins dans le monde entier", déclare Håkan Ekstrand, directeur commercial du groupe Tapflo.

Les pompes submersibles Tapflo sont disponibles en différentes tailles et capacités, et se caractérisent par des modèles avec interrupteur à flotteur ou capteur de contrôle de niveau pour un service économique et automatisé, un grand refroidissement du moteur, une grande profondeur d'immersion et un double positionnement de la direction de sortie.

"Nous avons toujours pour objectif de répondre aux demandes de nos fidèles clients et d'être un guichet unique pour leurs besoins en pompes. Avec la série de pompes submersibles Tapflo, nous espérons atteindre une satisfaction client encore plus élevée avec des pompes pour les fosses, l'évacuation, les eaux usées, etc.", explique Mikołaj Laguna-Horodniczy, directeur du marketing mondial du groupe Tapflo.

Les nouvelles séries de pompes sont disponibles dès aujourd'hui sur tous les marchés Tapflo.

Voir toute la série des pompes submersibles ici

TAPFLO DISTRIBUTION IN JORDAN

We are proud to announce our new distributor, Al Sharq as our sole distributor of Tapflo products in the Hashemite Kingdom of Jordan.

Al Sharq is a leading trading company based in Amman, Jordan for 20 years and represents multinational companies.

Mainly involved in representing a variety of multinational firms doing business in the form of equipment supply or the construction and execution of turn-key projects in different fields of developments.

Al Sharq has been involved in the fields of fertilizer/mining, aviation systems, water and sewage treatment plant, power plants and oil industry (refineries and pipelines). Al Sharq has also been working and developing business for international companies in Jordan that are represented by as: MAN Diesel and TURBO, Chesterton, Wood Group, SPX Cooling Technologies, Thermal Systems – India, Cesar Bonnetti, Ormazabal,GUNVOR, ESAB and always expanding for new principles’ to help them in developing business in Jordan.

Tapflo in Montreal has appointed Trident Pump & Filtration as a new dealer and service partner for the provinces of Atlantic Canada (New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland and Labrador).

Trident Pump & Filtration is a supplier of pumps, industrial equipment and accessories for water and wastewater treatment and other industrial applications, with branch locations in Dartmouth, Nova Scotia & Dieppe, New Brunswick.

More information, visit www.tridentpump.ca

TAPFLO GROUP SUPPORTS THE SWEDISH CHILDHOOD CANCER FOUNDATION

The Swedish Childhood Cancer Foundation works to ensure that affected children, teens and their families receive the care and support they need. Here you can read more about our core values, history and how we are organized.

The Swedish Childhood Cancer Foundation was founded in 1979 by parents of children with cancer, with the aim of creating a more hopeful future for children and teens diagnosed with cancer.

In the 1970s, a minority of children diagnosed with cancer survived. Today, almost 40 years later, the Swedish Childhood Cancer Foundation is the largest financier of childhood cancer research in Sweden and today more than 80 percent of the affected children survive.

The vision of the Swedish Childhood Cancer Foundation is to eradicate childhood cancer.

TAPFLO APPOINTS NEW DEALER IN THE NETHERLANDS

Delta Engineering BV, located in Assen, the Netherlands, is thé trusted and specialized player in the industrial market for the sales and distribution of high quality, A-brand components.

Carefully selected, Delta Engineering BV represents a small number of leading manufacturers, located around the world. In fact, each brand has gained worldwide recognition and leadership as preferred supplier to a wide range of industries.

Combined with many years of experience, our team of dedicated professionals is able to provide proven reliable, cost-effective and innovative solutions upon customer specific requirements for any application. This, supported with an excellent service level makes Delta Engineering BV the ideal partner for all your technical demands.

Delta Engineering BV challenge you to appeal our technical solutions…!

NEW SERIES OF INTELLIGENT DIAPHRAGM PUMPS FROM TAPFLO

Tapflo is proud to announce that a series of Intelligent diaphragm pumps has been implemented into company’s pump range portfolio. TC Intelligent pumps are fitted with ingenious LEAP^® technology developed by Tapflo.

LEAP^® or ‘Low Energy Air Pump’ is a patented technology used in AODD pumps to reduce the minimum operating air pressure by reducing internal losses and friction found in conventional AODD pumps. - LEAP uses a unique indirect system to detect the position of the diaphragm shaft controlling the diaphragm movement automatically- explains Colin Wreyford Technical Director at Tapflo.

KEY BENEFITS OF THE TC INTELLIGENT PUMPS

Ultra low-pressure operation – reduced energy consumption.
Impossible to stall – revolutionary control technology completely prevents stalling.
Available in Plastic, Metal and Sanitary series AODD pumps – TC50 - TC425 (T50 - T425 equivalent).
Retrofit – Leap can be fitted to any existing Tapflo Air Operated Diaphragm Pumps
Improved Lifespan – LEAP™ uses a seal-less air valve technology with significantly longer life expectancy over conventionally sealed vales.
Noise Reduction – lower air pressure = less noise of the pump.
Simplified Maintenance – main air valve can be changed in less than two minutes without the removal of the pump from the process line.
Simplified Control – integral solenoid valve control negates the need for an external pneumatic solenoid valve, reducing costs and simplifying control.
Electrical feedback – integral VFC output signal allows for external monitoring of pump strokes.
Batch Dispensing – using the integral VFC output and an external predetermining counter the pump can be automatically stopped after the required volume has been dispensed.
Dry Running – monitoring the frequency of the output pulses from the pump can determine if the pump is running dry due to increased stroke rate.
Dead Heading – as with dry running, the frequency of pulses can be monitored, alerting if the pump has a blockage.

ENERGY SAVINGS

- The extensive testing procedure has shown that the largest amount of energy required by a pump is used to overcome the resistance created by the pump itself. – says Colin Wreyford. Another major issue is found in the mid-port scenario, wherein the attempt to save energy by turning down the air pressure to a much lower level causes the stall of the pump.

The TC Intelligent pump is able to start pumping at 0.1 bar without stalling. In test the TC pump was already achieving flow rates of 70% of its maximum open end flow before other pumps had even started . At 0.3 (4.5 Psi) bar a standard Tapflo T50 pump fitted with LEAP® technology was already pumping at over 25 L/min, while all other air pumps tested failed to even start. To achieve the same flows and control other pumps required 1.2 bar pressure.

Tests undertaken to measure the performance of a standard pump against the new TC pump have resulted in an energy saving of up to 70%.

CASE STUDY

Tapflo’s customer’s application required the pump to run for the complete working day 5 days a week, when we consider this along with 48 weeks a year the savings can be significant.

Estimated costs for customer requiring a 2” pump and a fluid flow of 150 L/min at 1 bar discharge running 5 days a week:

a standard pump - an average of € 2,133 each year
a Tapflo TC intelligent pump - an average of € 1,378 each year
Savings € 755 each year.
Pump range availabilty

The LEAP® technology is available in below Tapflo pumps executions and sizes:

PE & PTFE PUMPS	METAL PUMPS	SANITARY PUMPS
TC50	TC70	TC80
TC100	TC120	TC125
TC200TC400	TC220TC420	TC225TC425

MOBILE SOLUTIONS FOR PUMP UNITS AND SYSTEMS

FLEXIBILITY AND SUPPORT AT EVERY STAGE OF THE PROCESS

Mobile units from Tapflo include both - Air operated diaphragm pumps as well as centrifugal pumps and can be combined with other accessories that make the solution useful for particular application.

The idea of Mobile pumping solutions is best illustrated by examples of units used in the industry and serving real customers to support their processes.

"Mobile" no longer applies to cell phones only.

In fact "mobile" refers to our everyday life more & more these days - mobile homes, mobile work, mobile ...

Why is that so? ... because mobile means flexibility !

Tapflo being a leader in our industry has understood and applied that trend long time ago.

Today thanks to our Engineering To Order approach we can add "mobility", to nearly every single pump we manufacture today.

Mobile Pump Units are most commonly used by industrial customers with spread liquid storage and a low intensity of unloading. The portability of the Units allows easy movement to various locations. This means almost limitless number of duties served by one pump unit. Now if user needs to unload several containers in different locations the mobile pump becomes most flexible solution. Additionally the pump equipped with counter-connections and hoses, which can also be part of the unit, make unloading liquid from several different tanks in different locations also very safe and cost efficient.

Mobile units from Tapflo include both - Air operated diaphragm pumps as well as centrifugal pumps and can be combined with other accessories that make the solution useful for particular application.

The idea of Mobile pumping solutions is best illustrated by examples of units used in the industry and serving real customers to support their processes.

TAPFLO ANNOUNCES NEW PLASTIC CENTRIFUGAL PUMP FOR AGGRESSIVE LIQUIDS CONTAINING SOLID PARTICLES

New compact and reliable, mechanically sealed centrifugal pumps give the right solution for liquids containing solid particles. Since there are no metal parts on the liquid side, the pumps are ideal for chemicals transfer and circulation in surface treatment industry.

Tapflo, the leading supplier of air operated diaphragm pumps, centrifugal pumps and other industrial process equipment, has announced today a new product range for a surface treatment industry. The company has launched a plastic version of its CT centrifugal pumps family - the CTP Pump. This portfolio update will allow to cover even more applications with Tapflo product range.

New Tapflo CTP pumps are available with BSP thread, flange or hose connections. The pumps can be used for chemically corrosive and toxic liquids as well as for clean and thin liquids like pure chemicals, acids and alkalis because the wetted components are non-metallic, injection molded thermoplastics enabling excellent corrosion resistance.

- The version in PP-GF (glass fibre reinforced polypropylene) provides great mechanical strength and allows liquid temperatures up to 70°C. The PVDF (PolyVinylidine DiFluoride) version has superior chemical resistance and allows temperatures up to 80°C – 90°C. - explains Mikolaj Laguna-Horodniczy from Tapflo Marketing

- The Mechanical seal is located on the dry side of the pump and is protected against contact with the liquid. In addition the, as standard, the spring is made of Hastelloy C which increases its chemical resistance in the unlikely event of a leakage. What characterizes our new plastic pump from is that the pump is equipped with a drainage option, which is designed to protect the motor against contact with any aggressive medium. CTP pumps allow pumping solid particles up to 3 mm in size and 10% in concentration. What is more the pump can handle metallic particles.– explains Jakub Zduńczyk Product Engineer at Tapflo

New CTP pumps form Tapflo can be used in various applications: transfer of various chemicals from storage tanks to smaller containers, transfer, filtering and circulation of surface treatment baths, pumping of CIP detergent used for cleaning of pipes and other food process equipment, Dosing of acids and alkalis used as cleaning chemicals in Nano filtration, just to name a few.

WE ARE PROUD TO ANNOUNCE THE ESTABLISHMENT OF TAPFLO BENELUX!

For many years it has been Tapflo’s wish to have their own facility in the Benelux. This wish has now come to fruition as TAPFLO Benelux B.V. is in full operation from Jan. 1, 2019.

TAPFLO Benelux B.V. has been founded to better serve our customers in the region and to be able to fulfill their needs more efficiently.

The company will serve Belgium, the Netherlands, and Luxembourg from its head office in Assen, The Netherlands.

_____________________________________________________________

TAPFLO Benelux combines many years of experience with the passion for fluid handling and pumps technology. The team of dedicated professionals provides proven reliable, cost-effective and innovative solutions upon customer specific requirements for any application. These values, together with an excellent level of service, makes TAPFLO Benelux B.V. the ideal partner for all your flow solution demands.

We take great pleasure and pride in announcing that Tapflo UK have made the finals for two categories in the upcoming Pump Industry Awards Ceremony: Technical Innovation Of The Year Finalist for Tapflo TC Intelligent Pump equipped with LEAP Low Energy Technology.

This category awards the innovative products which set new standards in the industry.

“Tapflo TC series pumps are based on standard Tapflo air operated diaphragm pumps but fitted with an power pack called LEAP®. The LEAP® technology was developed for a ultra-low flow high pressure applications. LEAP uses a unique indirect system to detect the position of the diaphragm shaft controlling the diaphragm movement automatically. The TC Intelligent pump is able to start pumping at 0.3 bar with no stalling, in test the pump was already achieving flow rates of 70% of its maximum open end flow before other pumps had even started.”

Supplier Of The Year Finalist for Tapflo Pumps UK LTD. This category awards suppliers to the pump industry that has demonstrated consistently high levels of technical innovation and developments, environmental awareness, customer service and satisfaction.

The Pump Industry Awards Judging Panel, including independent experts, representation from the press and sponsoring companies, spent the whole day analyzing and discussing every entry, to decide on the finalists. With a record number of entries being received this year a huge congratulations to Tapflo UK Team for making it through this rigorous process and being selected as a 2018 Finalist!

Public votes can be submitted from the 20th of February so we strongly encourage you to support Tapflo UK! Stay Tuned!

Huge thanks to the team for the last 12 months and an even bigger thanks to our many customers who have continued to support us!

TAPFLO Benelux BV became the exclusive distributor for SOMA Pumps GmbH

SOMA Pumps GmbH (www.soma-pumps.de) has decided to appoint TAPFLO Benelux BV to be their exclusive channel partner for the Netherlands, effective from the 11th of February, 2019.

The TAPFLO Benelux team has more than 20 years experience with pump-technology and is pleased to provide technical assistance and services to our customary high standards.

Phone: +31 (0) 85 00 743 00

Email: info@tapflo.nl

Address: Pottenbakkerstraat 38, 9403 VX Assen

If you need additional information, a written offer or a personal visit, please contact us.

To increase production capacity, Tapflo Factory expands its Hi-End machine park. The brand new Mazak CNC (computer numerical control) machine just arrived at the factory.

Mazak QUICK TURN is a multi-task machine brings together advanced technology, productivity and value to deliver exceptional performance.

Upgrading production machinery is an important element in Tapflo’s strategy of continuous development and assuring the highest possible quality of manufactured pumps and equipment.